The Vision Bright Tough Mount designed to fit the Vinyl/Rubber Rub rail and aluminum Rub rail extrusions on boat’s are fitted into the rail with the ends to match your rubber inserts. They come in three different standard lengths; a L16″ which excepts a 13″ LED light strip not to exceed a max length of 14″, The M23″ excepts 20″ LED light strips not to exceed a max length of 21″ and the most popular XL26″ which excepts a 23″ LED light strip not to exceed a max length of 24″. Our mounts not only protect and support your LED light strips without the need to stick them in place, they also look good on your boat.
Simply remove the rubber insert and install the Tough Mount. Re-install rubber insert by cutting to the required length.
All Vision Bright Tough Mount products are made here in the USA using a durable Marine grade plastic.
They are Tough enough to withstand the everyday normal wear and use they can be subjected to from the occasional rubbing up against docks, trees stumps or timber at the back of coves without the worry of your LED light strips getting damaged.
Tips on installing VBTMounts to the Rub Rails.
The Vision Bright Tough Mount Rub rail light systems give you that extra lighting when you need it…. Perfect for nighttime fishing or using them as accent illumination. Note: They are not coast guard approved for navigation. Always use your Coast Guard approved light pole and/or navigation lights for boats operating at night between sunset and sunrise . Check your local and state regulations for navigation light rules.
The Rub Rail light systems are for aluminum and rubber or vinyl extrusions matching the drawings above with rubber inserts shown. Note: #001 Rubber insert fits most Tracker aluminum and all other boats with same insert style ; #002 Rubber insert fits most Ranger aluminum and all other boats with same insert style ; #003 Rubber insert Fits most Ranger Boats w/ Vinyl or Rubber extrusions and all other boats with same insert style ; #004 Rubber insert Fits most Nitro, Skeeter and Triton Boats w/ Vinyl or Rubber extrusions and all other boats with same insert style.
For your Boat just match your Rubber insert and view the 2D drawings for dimensions.
For more 2D and 3D views of rub rails and dimensions click here.
For other boat Rub rail styles and shapes that are not listed please contact us if you are interested in a Rub rail light system for your boat. Please provide dimensions, photos and a sample of the rub rail insert from your boat for us to design a custom fit mount. Note: Some inserts with dimensions smaller than a 1/2″ width are to small to cut the slots needed for the LED light strips.
Check out The Rub Rail Light systems.